22.07.2016 | 3D printing expands range of services in product development
ENGESER uses 3D printing technology (or also called additive manufacturing technology) in prototyping and development of plastic parts.
 > more

15.07.2016 | Halftime 2016: First half is on schedule / honoring of 21 celebrating anniversaries
At this year's event under the slogan "Half 2016" a total of 21 jubilees were honored for their many years of job tenure.
 > more

27.06.2016 | Cooperation with Rational AG: ENGESER convinced with good performances
It is an award that especially pleased the company from Schramberg-Waldmössingen: ENGESER has been awarded by the internationally operating Rational AG for Newcomer of the year 2015.
 > more

02.07.2013 | Full automation: New Komax Gamma 263 – Crimping machine
ENGESER invested in two high-performance systems to ensure world-competitive prices for you in future. Talk to our sales team about your specific solution. The price advantages are very interesting.
 > more

05.04.2013 | Recertification (in compliance with ISO/TS 16949 and ISO 9001) completed successfully
Our recertification audit in compliance with ISO/TS 16949 and ISO 9001 was completed successfully at the end of January 2013.
 > more

22.02.2013 | Press release: Taking social responsibility seriously
According to company boss Gerhard Engeser, after a slight decline in 2012, the cable technology company’s operative business is once again “good to very good”. Lebenshilfe (a charitable association for people with mental disabilities) is one beneficiary of this and was recently presented with (another) cheque for 3000 euros.
 > more

11.01.2013 | Expansion of our production hall in the Czech Republic – construction will soon be underway
Planning has been completed and the expansion of the production hall at our site in the Czech Republic approved. Construction work is due to start in spring 2013.
 > more

21.12.2012 | ENGESER wishes you a happy Christmas
The year is drawing to a close. This is an ideal opportunity to say that it has been a pleasure working with you and thank you for the trust you have placed in us. ENGESER GmbH wishes you a relaxing and peaceful Christmas and a successful 2013.
 > more

27.11.2012 | Press release – Stadtanzeiger: Not a load of tangled cables but a cable harness
In a series of reports, the Stadtanzeiger newspaper (circulated in South-West Germany) introduces young women who work in typically male professions.
 > more

20.11.2012 | Great interest at electronica 2012 in Munich
The world’s largest trade fair for the electronics industry was held from 13 to 16 November 2012 in Munich. ENGESER was one of the exhibitors and presented its products and services.
 > more

29.10.2012 | New www.​engeser.​com website now online
The ENGESER website has been given a facelift. The new website has a “News” section that will keep you up to date with the latest information about the ENGESER Group. We have also increased the amount of information available about our products, services and technologies.
 > more

07.08.2012 | ENGESER thanks its long-serving employees for their contribution to the success of the company
As part of an employee meeting held on 13 July 2012 under the motto “Half time”, the companies looked back at the first half of 2012. The managing directors of both companies, ENGESER Kabeltechnik and ENGESER Verbindungstechnik, presented the results thus far to the 230 employees at the Schramberg-Waldmössingen site and also looked ahead to the rest of the year.
 > more

01.07.2012 | Steffen Engeser joins the management team
As Managing Director of ENGESER GmbH, Steffen Engeser is responsible for commercial services.
 > more

01.11.2011 | ENGESER GmbH safeguards site in the long-term
Investment in new building and renewable energies in Waldmössingen
 > more

26.10.2011 | ENGESER to use ACI laser marking system for labelling
In the automotive industry and in e-mobile vehicle cable assembly in particular, labelling cables is now a necessity. Lasers offer an easy means of labelling housings made of polypropylene and polyamide. Established labelling methods, such as ink-jet printing or hot-stamping, are gradually becoming less popular.
 > more

15.10.2011 | The ENGESER s.r.o. extension has been completed
These days, no-one wants to work without a large warehouse
 > more

02.05.2011 | ENGESER focuses on modern, high-voltage testing technology
The new age of electromobility has begun. As a result, ENGESER GmbH has experienced a dramatic rise in the demand for cables for electric vehicles. Module connectors for the battery cells in electric vehicles not only have higher requirements in terms of connection technology but also testing technology.
 > more

25.03.2011 | 21st “intertech” technology trade fair in Dornbirn, Vorarlberg
Together with Kabeltec GmbH and kEN Projekt- und Vertriebs-GmbH for the first time, ENGESER GmbH is showcasing innovative connection technology at the 21st “intertech” technology trade fair in Dornbirn.
 > more

10.12.2010 | New, flexible rotary-table machine for injection-moulding complex inserts
As a system supplier of complex assemblies, ENGESER is meeting the challenge of the increasing demands of its partners. In this context, overmoulding of cables or switches is becoming increasingly important. We have invested in an ARBURG vertical rotary-table system that is carefully tailored to the sometimes very specialised injection-moulding requirements of this area in particular.
 > more

20.08.2010 | New automation cell for plastic inserts at ENGESER
Another milestone has been reached in the rapidly growing “technical plastic parts” business area. The manual insertion of metal contact pins into injection-moulding tools has been automated so that a plastic housing with overmoulded contact pins can now be produced fully automatically.
 > more

05.05.2010 | New LASER-SOLDERING SYSTEM at ENGESER
Laser-soldering is a state-of-the-art soldering method for the selective soldering of delicate components. A diode laser operates as the heat source. The laser beam is absorbed by the component. As a result, the temperature increases and the solder melts. For a good soldered joint, it is important to establish a precise temperature-time pattern. This is achieved by the use of a pyrometer built into the laser head that is directed along the laser beam, operating coaxially to the laser beam.
 > more

10.01.2010 | The ENGESER Group decides in favour of OPTIMAL SYSTEMS
The ENGESER Group is introducing the OS|ECM enterprise content management suite throughout the Group as the leading information management system. Essentially, this suite is used for digital archiving, document management and process management. The solution facilitates work by offering greater clarity, speed and security.
 > more